
Mysore bonda
Tangy curd batter fried into puffed golden globes, crisp-shelled and pillowy inside, flecked with ginger, coconut and curry leaf.
Taste: Mild, with a gentle sweetness. Seasoned with curry leaves and coriander leaves. Fried until crisp. Made mostly from curd, maida and coconut.
In every version: vegetable oil.
Mysore Bonda (quick, curd and maida)
Ingredients
- 1 cup refined flour (maida)
- 1 cup curd
- 1 tsp baking soda
- 1 tsp oil, for the dough
- salt, as needed
- water, a little; warm water if dough is dry
- oil, for deep frying
Method
- Stir the baking soda and salt into the curd and leave about 5 minutes until it begins to froth (conditions not stated).
- Stir, add the flour and a little water and bring together into a soft, non-sticky dough; add warm water only if too dry.
- Rest the dough 5 minutes.
- Heat oil in a deep pan on medium-high. Pinch off rounds with your fingers and drop them in.
- Keep turning until browned all over, then drain on tissue and serve with chutney and sambar.
Served with: coconut chutney, sambar, chutney, masala chai, coffee
Tips for this version
- Softened mathri, nimki, vadas, pakoras or papdi crisp up again after a few minutes in a hot oven or air fryer.
- Whisk ground urad batter briskly in one direction for 1-3 minutes until light; the trapped air makes vadas and bondas fluffy.
- Stir 1-2 tablespoons of rice flour (or a little fine sooji, poha or rava) into runny vada batter, then aerate it again.
- Grind drained urad dal with only a few spoons of water into a smooth, thick batter that holds its shape when scooped.
- For maida-curd Mysore bonda, let soda and salt froth in the curd about 5 minutes before adding flour, then rest the batter (one recipe says 4 hours) and beat again.
- Mysore bonda batter should be soft, medium-thick and not sticky so it slides off the fingers; too thick or thin also soaks up oil.
- Drop bondas into the oil from close to its surface so they stay round.
- Mysore bonda batter is either maida with curd or one based on urad dal.
Mysore Bonda (rested batter, coconut and cumin)
Ingredients
Method
- Whisk curd, salt and baking soda together until frothy.
- Add maida and mix gently, adding more curd if needed, then beat in one direction until the batter turns elastic.
- Mix in chillies, ginger, curry leaves, coconut, coriander and cumin.
- Cover and rest 4 hours (conditions not stated), then beat for another minute.
- With a wet hand, drop ball-sized portions close to the surface of hot oil.
- Fry on medium, stirring, until golden and crisp; drain and serve hot with chutney.
Served with: coconut chutney, sambar, chutney, masala chai, coffee
Tips for this version
- Softened mathri, nimki, vadas, pakoras or papdi crisp up again after a few minutes in a hot oven or air fryer.
- Whisk ground urad batter briskly in one direction for 1-3 minutes until light; the trapped air makes vadas and bondas fluffy.
- Stir 1-2 tablespoons of rice flour (or a little fine sooji, poha or rava) into runny vada batter, then aerate it again.
- Grind drained urad dal with only a few spoons of water into a smooth, thick batter that holds its shape when scooped.
- For maida-curd Mysore bonda, let soda and salt froth in the curd about 5 minutes before adding flour, then rest the batter (one recipe says 4 hours) and beat again.
- Mysore bonda batter should be soft, medium-thick and not sticky so it slides off the fingers; too thick or thin also soaks up oil.
- Drop bondas into the oil from close to its surface so they stay round.
- Mysore bonda batter is either maida with curd or one based on urad dal.
Mysore Bonda (urad dal)
Ingredients
- ½ cup urad dal
- 1 tbsp rice flour, only if batter is loose
- 1 green chilli optional
- 1 tsp peppercorns, slightly crushed
- curry leaves, a few, chopped
- 1 handful coconut pieces
- coriander leaves, a few, chopped
- salt, as needed
- water, ice water, 1/4 cup or less
- oil, for deep frying
Method
- Soak the urad dal 1 hour, keeping it in the fridge until grinding.
- Grind with very little ice water, the salt and the green chilli.
- Mix in coconut, curry leaves, coriander and crushed pepper; add rice flour only if the batter is watery.
- Heat oil in a kadai and drop in portions; fry in batches on low to medium flame.
- Drain on tissue and serve with coconut chutney.
Served with: coconut chutney, sambar, chutney, masala chai, coffee
Tips for this version
- Softened mathri, nimki, vadas, pakoras or papdi crisp up again after a few minutes in a hot oven or air fryer.
- Whisk ground urad batter briskly in one direction for 1-3 minutes until light; the trapped air makes vadas and bondas fluffy.
- Stir 1-2 tablespoons of rice flour (or a little fine sooji, poha or rava) into runny vada batter, then aerate it again.
- Grind drained urad dal with only a few spoons of water into a smooth, thick batter that holds its shape when scooped.
- For maida-curd Mysore bonda, let soda and salt froth in the curd about 5 minutes before adding flour, then rest the batter (one recipe says 4 hours) and beat again.
- Mysore bonda batter should be soft, medium-thick and not sticky so it slides off the fingers; too thick or thin also soaks up oil.
- Drop bondas into the oil from close to its surface so they stay round.
- Mysore bonda batter is either maida with curd or one based on urad dal.
Where it comes from
- Karnataka
Seasons
- Monsoon
Festivals
Janmashtami, Ganesh Chaturthi, Varalakshmi Vratam, Nag Panchami, Holi, Ugadi, Maha Shivratri, Chaitra Navratri
Questions answered
Useful tips
- Mysore bonda batter: froth the curd, rest and beat. For maida-curd Mysore bonda, let soda and salt froth in the curd about 5 minutes before adding flour, then rest the batter (one recipe says 4 hours) and beat again.
- Mysore bonda batter consistency. Mysore bonda batter should be soft, medium-thick and not sticky so it slides off the fingers; too thick or thin also soaks up oil.
- Mysore bonda base. Mysore bonda batter is either maida with curd or one based on urad dal.
- Urad Mysore bonda versus Mangalore bonda. One source distinguishes the urad-dal Mysore bonda from Mangalore bonda, which is made with maida and curd.
- Rescue a runny vada batter with rice flour. Stir 1-2 tablespoons of rice flour (or a little fine sooji, poha or rava) into runny vada batter, then aerate it again.
- Hard Mysore bondas: add a pinch more soda. If Mysore bondas come out hard, mix another pinch of baking soda into the batter. Few sources say this.
- Re-crisp softened fried snacks in an oven or air fryer. Softened mathri, nimki, vadas, pakoras or papdi crisp up again after a few minutes in a hot oven or air fryer.
- Grind medu vada batter thick with minimal water. Grind drained urad dal with only a few spoons of water into a smooth, thick batter that holds its shape when scooped.
- Beat urad batter to aerate it. Whisk ground urad batter briskly in one direction for 1-3 minutes until light; the trapped air makes vadas and bondas fluffy.
- Drop bondas close to the oil. Drop bondas into the oil from close to its surface so they stay round.
- Serve bondas straight away. Serve Mysore bondas straight from the oil; made ahead they go soggy and ooze oil. Few sources say this.
- Getti chutney: a thick Tamil tiffin chutney. Getti chutney is a thick Tamil-style chutney eaten with idli, dosa, vada and pongal, and in restaurants especially alongside bajji and bonda.